EPIG BioKiK Degreaser for Oven & Dip Tanks 5ltr (<2% caustic)

Epig BioKik Degreaser

Heavy Duty & Bio for Oven & Dip Tanks (<2%caustic)

This unique combination of surface active agents, sequestrants, alkaline builders and biocide was designed to degrease, clean and sanitise in one operation, giving an enhanced performance on greasy surfaces where the alkaline agents combine with batericide to produce a clean 99.99% germ free environment after use 

For use in Dip Tanks containing Sodium Hydroxide Pearls & For Ovens inside the internal carcass, simply heat, spray, leave for a minute or so then blade and clean as you normally would.

Using BioKiK in your dip tanks with caustic pearls will help stabilise your tank mix, reducing residue and extending its life between refills.

Dilution levels are always a guide, simply use as much or as little as you need for the job at hand and find your own preferred level of strength. Follow the dilution guide and roughly 5 Litres of Epig BioKiK Degreaser will make 50 x 1 litre trigger bottles or 500 litres of tank water.

This product can be used on all other areas, including but not limited to hobs, glass and microwaves, but "may" dull shiny aluminium when used neat. Yet when diluted correctly can be used on aluminium. Powder coated extractor hoods and door fronts could fade due to the high degreasing performance, on these surfaces the Epig Multi surface degreaser is recommended.

Developed specifically for professional oven cleaners, our powerful heavy-duty degreaser rapidly lifts grease, carbon and other deposits with ease.

Water based, Biodegradable & and unaffected by water hardeners this Food safe oven cleaner is safe to use on all cooking appliances and surfaces such as metal, plastic, rubber and glass.

• Enzyme, perfume & Dye free
• Effective at Higher Dilutions
• Contains Powerful biocide (anti-bac)
• Food Contactable
• Aluminium friendly (when diluted - test small area first)
• Produced under ISO9001

For use diluted in trigger spray & oven cleaning dip tanks.

Application:

Trigger spray: Dilute 12:1 for regular use, for very heavy deposits dilute 8:1, Allow a few minutes contact time, rinse and dry well.

Dip Tank Dilution guide: 500ml per 60ltr water/sodium hydroxide mix (mix to desired effectiveness)

Cleaning aluminium: Dilute 100:1 (test small area first)

Can also be used Neat (not aluminium)

May dull shiny aluminium at high concentrate

Your SDS will be delivered by email link shortly after purchase.

Please note this is a TRADE Product; as such you are expected to carry out your own internal risk assessments from the information and SDS sheet as provided, no liability will be held by Epig Cleaning Products Limited for its use/misuse by the purchaser or other person/s however obtained after delivery.